










Sorrento Linear Timber Pendant Light - Dimmable LED Dining Bar Light
We proudly offer complimentary shipping on every order — no minimum spend, no surprises at checkout.
Shop with confidence knowing that if anything turns up damaged, faulty, or simply isn't what you ordered, you're completely covered — at no cost to you.
Email info@alvarahome.com with your order number and we'll take care of the rest.
We're always happy to help with any questions.
Customer service hours: Monday to Friday, 9:00am – 5:00pm AEST
Email: info@alvarahome.com
The Sorrento Linear Timber Pendant Light is a single slim bar of solid timber with a continuous LED strip recessed into its underside, so the fitting itself stays quiet and only the light does the work. Seen from a chair it reads as a plain length of pine or black walnut floating above the table; switch it on and a soft even band of light falls straight down the length of the surface, with no glare in anyone's eyes and no bulb to see. It comes in four lengths from 80cm (31.5in) to 180cm (70.9in), so it can be matched to the table rather than left looking stranded - the usual rule is a fitting roughly two thirds the length of the table. The timber profile is slim at 3.5 x 5cm (1.4 x 2.0in), and the suspension drops up to 200cm (78.7in) for high ceilings. Each timber comes two ways: the A versions hang on two fine cables straight to the ceiling, while the B versions add a matching timber rail fixed flat to the ceiling that the cables drop from, which hides the wiring and suits an exposed or featureless ceiling. Warm, neutral and cool white are fixed; the dimmable version sets both the brightness and the colour temperature from a remote handset.
Key Features
- Light from the underside only: The LED strip sits behind a diffuser recessed into the base of the bar, so the table is lit evenly and nobody looks into a bare globe across dinner.
- Four lengths to suit the table: 80, 120, 150 and 180cm (31.5, 47.2, 59.1 and 70.9in) with matching output from 12W to 30W, so a small round table and a ten-seater each get the right fitting.
- Two mounts per timber: The A versions drop on two fine cables for a floating look; the B versions add a matching timber ceiling rail that conceals the wiring and reads as a deliberate architectural line.
- Solid pine or black walnut: Pine is pale and blond for coastal and Scandinavian rooms; black walnut is deep and warm-grained for Japandi and moody interiors. Both are real timber, not a printed finish.
- Four light options including remote dimming: Fixed warm, neutral or cool white, or the dimmable version, whose remote handset changes both brightness and colour temperature from the sofa.
- Slim 3.5 x 5cm profile: The bar is deliberately thin, so a 180cm fitting still feels light overhead rather than like a beam crossing the room.
- Adjustable drop to 200cm: The cables shorten on site to hang at the usual 75cm (29.5in) above a dining table, or stay long for a high ceiling or a stairwell.
Specifications & Dimensions
- Sizes Available: 80cm (31.5in) 12W, 120cm (47.2in) 18W, 150cm (59.1in) 24W and 180cm (70.9in) 30W
- Bar Profile: 3.5cm wide x 5cm deep (1.4 x 2.0in)
- Maximum Drop: 200cm (78.7in), shortened on site to suit the ceiling
- Materials: Solid timber bar in pine or black walnut, aluminium LED channel, polycarbonate diffuser
- Colour Options: Pine A, Pine B, Walnut A and Walnut B
- Mounting: Pine A and Walnut A hang on two fine cables to two small ceiling mounts; Pine B and Walnut B hang from a matching timber rail fixed flat to the ceiling
- Light Source: Integrated LED strip behind a diffuser along the underside; not user-replaceable
- Light Temperature Options: Warm light, neutral light, cool light, and dimmable
- Switching: The fixed warm, neutral and cool versions switch at the wall; the dimmable version adjusts brightness and colour temperature from a remote handset
- Operating Voltage: 110 - 240V
- Recommended Use: Over dining tables, kitchen islands and long benches; indoor use
- Recommended Hanging Height: About 75cm (29.5in) above a dining table and 80 - 85cm (31.5 - 33.5in) above a benchtop
Care Instructions
Switch the light off at the wall and let it cool before you touch it. Dust the timber bar along the grain with a dry microfibre cloth or a soft brush; a barely damp cloth is fine for marks, but wipe it dry straight away, because solid timber will raise its grain and can cup if water sits on it. Never use furniture polish, wax sprays, solvents or anything containing silicone on the timber - they leave a film that dulls the natural finish and attracts more dust than they remove. Clean the diffuser strip on the underside with a dry or very lightly dampened cloth only, and never with glass cleaner or alcohol wipes, which craze polycarbonate and leave permanent cloudiness right where the light comes out. Keep water away from the cable entries and the ceiling mount entirely. The LED strip is integrated and sealed into the channel, so there is no globe to change; if a section ever fails the fitting is replaced rather than re-lamped, which is normal for an integrated LED. Have it installed and any shortening of the cables done by a licensed electrician, and if it hangs over a dining table check the height with the chairs pulled out before the cables are cut, since that is the one measurement nobody can undo.
Choose options











