Lerie LED Ceiling Light – Timber & Acrylic Flush Mount Oyster

The Lerie LED Ceiling Light wraps a slim, bright LED panel in a solid timber rim, giving a plain oyster light the warmth of natural wood grain. At just 4.5 cm deep it sits tight against the ceiling and disappears into the architecture, while the frosted acrylic face spreads a clean, even light with no visible hot spots or glare. Choose the round profile for a softer, more traditional look or the square profile for a crisper, more architectural line, then pick from four diameters to suit anything from a small hallway to a full living room. Warm white, cool white and tri-colour switchable options let you set the mood, and the integrated LED runs efficiently for years with no bulbs to replace. It is a practical, good-looking answer for bedrooms, living rooms, dining rooms, kitchens, home offices and apartments with low ceilings, and it sits comfortably in Scandinavian, Japandi, coastal and modern Australian interiors.

Key Features

• Solid Timber Rim: A natural wood frame warms the fixture and pairs with oak, ash and walnut interiors.
• Round or Square: Two profiles — soft and rounded, or crisp and architectural — in the same finish.
• Ultra-Slim 4.5 cm Profile: Sits flush to the ceiling, ideal for low ceilings, hallways and apartments.
• Four Sizes: 30, 40, 50 and 60 cm to light rooms from about 5 to 20 m².
• Adjustable Light Colour: Warm white, cool white, or tri-colour switchable to change the mood by room.
• Bright, Efficient LED: 24–58 W delivering 1920–4640 lumens, with no bulbs to replace.
• No Assembly Required: Arrives complete and mounts straight to a standard ceiling point.

Specifications

• Material: Natural timber frame with a frosted acrylic diffuser
• Light Source: Integrated LED, included
• Power: 24 W / 36 W / 48 W / 58 W by size
• Brightness: 1920 / 2880 / 3840 / 4640 lumens by size
• Voltage: AC 220–240 V
• Light Colour: Warm white, cool white, or tri-colour switchable
• Recommended Room Size: 5–20 m²
• Mounting: Flush mount, hard-wired — no assembly required
• Certification: CE, UL
• IP Rating: IP20 — indoor, dry locations only

Dimensions

• Round: 30 cm (11.8 in), 40 cm (15.7 in), 50 cm (19.7 in) or 60 cm (23.6 in) diameter
• Square: 30 cm (11.8 in), 40 cm (15.7 in), 50 cm (19.7 in) or 60 cm (23.6 in) across
• Height: 4.5 cm (1.8 in) on every size
• Weight — Round: 1.1 / 1.3 / 1.5 / 1.6 kg (2.4 / 2.9 / 3.3 / 3.5 lb)
• Weight — Square: 1.4 / 1.6 / 1.8 / 2.0 kg (3.1 / 3.5 / 4.0 / 4.4 lb)

Care & Maintenance

• Switch off at the wall and let the fitting cool before cleaning.
• Dust the timber rim with a dry microfibre cloth, following the direction of the grain.
• Do not use water, oil soaps, furniture polish or wax on the timber — moisture can raise the grain and polish leaves a film.
• Clean the acrylic diffuser with a soft dry cloth only. Solvents, alcohol, ammonia and abrasive cleaners will craze and cloud acrylic.
• Keep the fixture out of steamy rooms and direct sun; sustained damp can warp timber and strong sun can fade it.