Suraya Bollard Light - Cubic Die-Cast Aluminium LED
We proudly offer complimentary shipping on every order, anywhere in Australia — no minimum spend, no surprises at checkout.
Shop with confidence knowing that if anything turns up damaged, faulty, or simply isn't what you ordered, you're completely covered — at no cost to you.
Email info@alvarahome.com with your order number and we'll take care of the rest.
We're always happy to help with any questions.
Customer service hours: Monday to Friday, 9:00am – 5:00pm AEST
Email: info@alvarahome.com
The Suraya Bollard Light strips a path light back to a single clean gesture: a straight square-section column in die-cast aluminium, topped with an exposed LED that casts light down onto the ground where you actually need it. There is no lantern housing, no louvre stack and no decorative cap - just crisp flat faces and sharp edges, which is what makes it sit so comfortably alongside rendered walls, limestone paving, board-formed concrete and clipped native planting. The integrated LED runs at a warm white 3000K so paving and mulch keep their natural tone after dark, and the PMMA diffuser softens the source without swallowing the output. Two heights are available: a 40.6 cm bollard for garden beds, pool surrounds and low borders, and a 61 cm version for entry paths and driveways. Hardwired for 100-240V and rated IP65, it is made from rust and water resistant die-cast aluminium for long service in exposed and coastal gardens.
Key Features
- Minimalist Cubic Form: A straight square-section column with crisp flat faces and sharp edges that suits modern architectural landscaping.
- Exposed LED Top: The light source sits open at the head of the column, throwing efficient downward light onto paths and paving.
- Two Heights: 40.6 cm for garden beds, borders and pool surrounds, or 61 cm for entry paths, walkways and driveways.
- Die-Cast Aluminium Body: Rust and water resistant construction built for long outdoor service, including coastal and poolside positions.
- Warm White 3000K, IP65: A warm 6W or 10W LED at 70 lumens per watt, sealed against rain, sprinklers and dust year-round.
Specifications & Dimensions
- Body Material: Die-cast aluminium, rust and water resistant
- Shade Material: PMMA diffuser
- Finish Options: Black or grey
- Available Heights: Small 40.6 cm (16 in); Large 61 cm (24 in)
- Light Source: Integrated LED, exposed top design, bulb included
- Colour Temperature: Warm white 3000K
- Power: 6W or 10W depending on size
- Efficacy: 70 lumens per watt
- Power Supply: Hardwired
- Voltage: 100-240V
- Control Type: Wall switch
- Weatherproof Rating: IP65
- Mounting: Ground mounted
- Recommended Use: Entry paths, walkways, driveways, garden beds, borders and pool surrounds
Care Instructions
Wipe the die-cast aluminium column with a soft, damp cloth and dry it off so water does not sit on the finish; avoid abrasive pads, scourers and solvent cleaners, which will scratch the coating and leave bare metal open to corrosion. Clean the PMMA diffuser at the top with a soft cloth and mild soapy water only, as alcohol, acetone and ammonia-based cleaners will craze acrylic. Because the LED head is exposed, clear leaves, cobwebs and insects from the top opening every few months so output stays even. Keep mulch and soil away from the base so moisture does not pool around the ground fixing, and rinse with fresh water periodically in coastal gardens. Isolate power at the switchboard before any maintenance.
Choose options