Oxford RGB Outdoor Spotlight - Adjustable LED Garden Uplight
We proudly offer complimentary shipping on every order — no minimum spend, no surprises at checkout.
Shop with confidence knowing that if anything turns up damaged, faulty, or simply isn't what you ordered, you're completely covered — at no cost to you.
Email info@alvarahome.com with your order number and we'll take care of the rest.
We're always happy to help with any questions.
Customer service hours: Monday to Friday, 9:00am – 5:00pm AEST
Email: info@alvarahome.com
The Oxford RGB Outdoor Spotlight is a powerful colour-changing uplight for gardens, feature walls and trees. Its angular wedge-shaped housing is made from die-cast aluminium with a tempered glass lens and sits on an adjustable yoke bracket, so you can tilt the beam up a palm trunk, across a rendered wall or into a hedge. Inside, 36 LED beads produce rich RGB colour with a colour rendering index of Ra 90, and the housing is rated IP65 against dust and rain. Choose from three outputs: 30W for courtyards and single plants, 50W for medium trees and walls, or 72W for tall palms, large gums and building facades. Each output comes in two versions, Plug In with a 3.05m (10ft) cord, or Hardwired for a permanent installation by a licensed electrician, and it is sold as a single light or in 2, 4, 6 and 8-packs so a whole garden can be lit in matching colour. The grey housing measures 21.5 x 21.5 x 29cm (8.5 x 8.5 x 11.4in), compact enough to tuck into a garden bed, and the LEDs are rated for around 50,000 hours. It is made for long evenings outdoors, from a frangipani glowing by the pool to a sandstone wall lit behind the fire pit, and suits modern Australian gardens, entertaining areas and coastal landscapes.
Key Features
- RGB colour changing: 36 LED beads paint trees, walls and hedges in vivid colour.
- Adjustable yoke bracket: Tilt the beam precisely onto palms, trunks and feature walls.
- Three power outputs: 30W, 50W or 72W to match the size of what you are lighting.
- Plug In or Hardwired: A 3.05m (10ft) plug-in cord, or a permanent hardwired connection.
- IP65 die-cast aluminium: A weatherproof housing with a tempered glass lens.
- Ra 90 colour rendering: High CRI keeps colours rich and true.
- 50,000-hour LEDs: Low-maintenance lighting with no globes to replace.
Specifications & Dimensions
- Overall Dimensions: 21.5cm (W) x 21.5cm (D) x 29cm (H) / 8.5" x 8.5" x 11.4"
- Power Options: 30W; 50W; 72W
- Power Source Options: Plug In (3.05m / 10ft cord); Hardwired
- Pack Sizes: Single; 2-Pack; 4-Pack; 6-Pack; 8-Pack
- Materials: Die-cast aluminium housing, tempered glass lens
- Colour: Grey
- Light Source: LED, 36 beads
- Light Colour: RGB colour changing
- Colour Rendering Index: Ra 90
- Operating Voltage: 110-240V
- Ingress Protection: IP65
- Lifespan: Approx. 50,000 hours
- Mounting: Adjustable yoke bracket
- Style: Industrial
- Recommended Use: Uplighting trees, palms, hedges, feature walls and facades in gardens, courtyards and entertaining areas
Care Instructions
Switch the spotlight off at the wall or unplug it, and let it cool fully before cleaning, as the housing gets warm in use. Brush leaves, mulch and soil off the die-cast aluminium housing and wipe it with a soft cloth and mild soapy water; avoid solvents, degreasers and abrasive pads, which dull the grey finish and expose the aluminium to corrosion. Clean the tempered glass lens with a damp microfibre cloth so the beam stays bright, and never use a pressure washer or point a hose jet at the lens seal. Keep the back of the housing and the area around the light clear of mulch and leaf litter so heat can escape. Loosen the yoke bracket fixing before re-aiming the light rather than forcing it. On plug-in versions, keep the plug and any outdoor connection off the ground and inside a weatherproof enclosure, and have hardwired versions serviced only by a licensed electrician.
Choose options