Freo Outdoor Wall Light - PIR Motion Sensor LED Wall Sconce
We proudly offer complimentary shipping on every order — no minimum spend, no surprises at checkout.
Shop with confidence knowing that if anything turns up damaged, faulty, or simply isn't what you ordered, you're completely covered — at no cost to you.
Email info@alvarahome.com with your order number and we'll take care of the rest.
We're always happy to help with any questions.
Customer service hours: Monday to Friday, 9:00am – 5:00pm AEST
Email: info@alvarahome.com
The Freo Outdoor Wall Light is a slim black column sconce with a clear crystal-look diffuser, designed to look tidy on a modern facade and to work hard as security lighting. Two versions are available: a 7W single light at 27cm (10.6in) tall with a clear diffuser on top, and a 14W up and down version at 30cm (11.8in) tall with clear diffusers at both ends that throw light up and down the wall. Both have a 5 x 6cm (2.0 x 2.4in) body and stand 8cm (3.1in) off the wall. Choose a model with a PIR motion sensor and it switches on when someone approaches, covering a 110 degree field from 3-6m (9.8-19.7ft) away, then stays on for 20-60 seconds after movement stops; a built-in daylight sensor stops it triggering during the day. The non-sensor models simply run from your wall switch. Pick warm 3000K for a soft welcome, neutral 4000K for a balanced light, or white 6000K for crisp security lighting over driveways and side paths. Built for rain, humidity and temperature swings, it suits Australian entries, garages, gate pillars and garden walls, mounts up to 3.5m (11.5ft) high and is hardwired on AC 85-265V.
Key Features
- PIR Motion Sensor Option: Switches on automatically when movement is detected, for safer entries and driveways.
- Daylight Sensor: A built-in photosensor stops sensor models switching on in daylight, saving energy.
- Adjustable Time Delay: Stays on for 20-60 seconds after movement stops, so the light does not cut out abruptly.
- 7W or 14W Up and Down: 27cm (10.6in) single light, or a 30cm (11.8in) model that lights up and down the wall.
- Three Light Colours: Warm 3000K, neutral 4000K or white 6000K to suit a welcome light or security light.
- Slim Black Column: A 5 x 6cm (2.0 x 2.4in) body with a clear crystal-look diffuser for a clean modern look.
- Weatherproof Build: Made to handle rain, humidity and temperature swings for year-round outdoor use.
Specifications & Dimensions
- Type: Outdoor wall sconce, with or without PIR motion sensor
- 7W Model (H x W x D): 27 x 5 x 6cm (10.6 x 2.0 x 2.4in), single light, 8cm (3.1in) projection from wall
- 14W Model (H x W x D): 30 x 5 x 6cm (11.8 x 2.0 x 2.4in), up and down light, 8cm (3.1in) projection from wall
- Finish: Black body with clear crystal-look diffuser
- Light Source: Integrated LED (included)
- Colour Temperature: Warm 3000K, neutral 4000K or white 6000K
- Power: 7W or 14W
- Sensor (PIR models): 110 degree detection angle, 3-6m (9.8-19.7ft) range, 20-60 second time delay, daylight sensor
- Maximum Installation Height: 3.5m (11.5ft)
- Operating Voltage: AC 85-265V, 50/60Hz
- Power Source: Hardwired
- Mounting: Wall mounted, installation by a licensed electrician
- Recommended Use: Front entries, driveways, garages, gate pillars, side paths, porches and garden walls
Care Instructions
Switch the light off at the wall and let it cool before cleaning. Wipe the black metal body with a soft cloth dampened with water and a little mild detergent, then dry it; avoid solvents, bleach and abrasive pads, which dull the black finish and expose the metal to corrosion. The clear crystal-look diffusers show water spots and dust, so clean them with a soft microfibre cloth and plain water or a mild glass cleaner sprayed onto the cloth, never sprayed directly into the fitting. On PIR models, keep the sensor lens clean and free of cobwebs, as a dirty lens shortens the detection range and can cause false triggers; wipe it gently with a dry cloth and never scratch it. Trim back plants that sway in front of the sensor. In coastal areas, rinse the light with fresh water every few months to remove salt. Do not pressure-wash the fitting or aim a hose into the sensor. The LED is integrated and not user-replaceable; any repair or rewiring should be done by a licensed electrician.
Choose options