Bali Travertine Ceiling Light – Natural Stone Semi-Flush Mount

The Bali Travertine Ceiling Light brings genuine natural stone to the ceiling, where it is least expected and most quietly luxurious. A wide, shallow travertine saucer is capped with a turned timber detail and holds a single opal glass globe beneath it, so the light is soft, warm and completely glare-free. Because travertine is a natural stone, the tone, veining and open pitting differ from piece to piece — no two fixtures are quite the same. Its low semi-flush profile sits close to the ceiling, making it a genuine option for hallways, entryways, bedrooms, small landings and reading corners where a hanging pendant would crowd the space. Calm, earthy and unmistakably tactile, the Bali suits Japandi, Scandinavian, coastal and wabi-sabi Australian interiors that lean on natural materials rather than ornament.

Key Features

• Genuine Travertine Shade: Solid natural stone with unique veining and open pitting, so every piece is one of a kind.
• Warm Opal Glass Globe: A frosted glass sphere diffuses the light into a soft, relaxing glow with no glare.
• Timber Detailing: A turned timber cap warms the stone and ties the fixture to oak and walnut interiors.
• Low Semi-Flush Profile: Only 10 cm deep, so it works in hallways, entryways and rooms with standard or low ceilings.
• Compact 25 cm Scale: Sized for smaller spaces — an entry, landing, walk-in robe, bedside nook or quiet corner.
• Easy to Install: Lightweight for a stone fixture and mounts directly to a standard ceiling point.

Specifications

• Material: Natural travertine stone with timber detailing and an opal glass diffuser
• Finish: Natural honed stone
• Light Source: G9 LED
• Light Colour: Warm white
• Voltage: AC 220–240 V
• Dimmable: No
• Recommended Room Size: 5–10 m²
• Mounting: Semi-flush ceiling mount, hard-wired
• IP Rating: IP20 — indoor, dry locations only

Dimensions

• Diameter: 25 cm (9.8 in)
• Height: 10 cm (3.9 in)

Care & Maintenance

• Switch off at the wall and let the fitting cool before cleaning.
• Travertine is porous — dust it with a dry, soft cloth or a clean soft brush to lift dust from the natural pitting.
• Never use vinegar, lemon, bleach or any acidic or abrasive cleaner on the stone; acids etch travertine permanently.
• Avoid soaking the stone. If a mark needs attention, use a barely damp cloth with plain water and dry immediately.
• Clean the opal glass globe separately with a soft cloth and a little glass cleaner applied to the cloth, never sprayed onto the fixture.
• Expect slight variation in tone and veining over time — this is normal for natural stone, not a fault.